Global Invacom Fibre IRS LNBm Universal MkII LNB

Global Invacom Fibre IRS LNBm Universal MkII LNB

Prix normal
€149.00 (Excl.VAT €121.14 )
Prix réduit
Prix normal
Prix unitaire
Taxes incluses. Frais d'expédition calculés lors du passage à la caisse.

GLOBAL INVACOM UNIVERSAL FIBRE OPTICAL OUTPUT LNB -  NEW IMPROVED MODEL  Features   - Converts all 4 universal IF bands to a single optical output (H/H - H/L - V/H - V/L = single optical output). - Capable of supplying all converted signals to 32 distribution points spread over a 10 kilometre radius. - 40 mm Feed Horn.  

The GI FibreMDU Optical Output LNB radically changes how satellite IF signals are dealt with compared with conventional universal LNBs.

This innovative new design uses patented technology to frequency stack both horizontal and vertical polarities, creating a single IF frequency range of 950MHz - 5,45GHz. The newly created single band is then frequency modulated optically and output using a 1310nm laser internal to the Optical Output LNB.  

Powered separately the Optical LNB takes the required <450mA from a standard 12V supply utilising a standard female F type connector.

Fibre connection is made via a standard FC/PC connector feeding the distribution network on single mode fibre optic cable. With an optical output +7dBm the GI FibreMDU Optical Output LNB is easily capable of driving up to 32 GI FibreMDU converters located within a 10km radius.  

Specifications   Input frequency - 10,7 - 12,75 GHz (H and V) Output frequency - 950MHz - 5,45GHz, modulated laser output 1310 nm Optical output power - 7dBm nominal at 25°C, +/-2dBm over full temperature range Noise figure - 0,5 - 1,3 dB (depends on ambient temperature) Gain - 62 - 72 dB (at room temperature) Gain variation - +/- 2dB (-30 - +60°C) Gain flatness - 5dB per band (0,95 - 5,45GHz) Gain ripple - The gain ripple per 26MHz bandwidth must be less than +/-0,5dB Phase noise - Offset frequency - Maximum limit: 1KHz - -55dBc/Hz, 10KHz - -80dBc/Hz, 100KHz - -100dBc/Hz, 1MHz - -110dBc/Hz Local oscillator stability - Condition - Max variation from nominal freq. Initial setting +/-1MHz. Temp. drift (-40 - +60°C) +/-2MHz. Aging and total drift (10 year life) +/-4MHz Current consumption - < 450mA Image rejection - 40dB min. Cross polar isolation - min. 25dB, typ. 30dB Output connectors - DC Input - F-connector (female), Optical output - FC/PC Supply voltage - 12V Spurious output - (after recovering modulation) in band (950MHz - 3GHz, 3,4GHz - 5,45GHz) -25dBc Temperature range - -30 - +60°C operating, -40 - +70°C storage Dish and LNB mechanical interface - 40mm clamp